The hood
A long hood takes bugs, bird droppings and stone chips, and it is the first panel to heat-spot in sun. Check it in daylight and remove droppings quickly, as the bird dropping guide describes.
An 812 or a 12Cilindri is a front-engined V12 GT, so the long hood is the largest and most exposed piece of paint on the car, and the engine under it runs hot. Everything else follows the usual careful routine.
We have detailed one Ferrari, a 296 GTS, and no V12 Ferrari. This is general care for the car, and an honest limit: a quote conversation comes first.
A long hood, a V12 up front and big wheels: where care concentrates on this kind of Ferrari.
We have detailed one Ferrari: a 296 GTS, booked as a full detail and done in the owner's garage bay in Pacific Heights. We have no before photos of it, so the case study shows the finished car and does not claim a transformation.
We have not detailed an 812 Superfast, an 812 GTS, a 12Cilindri or any V12 Ferrari. We are a mobile detailing company that also looks after high-value cars, and we are not factory-certified by any manufacturer.
A long hood takes bugs, bird droppings and stone chips, and it is the first panel to heat-spot in sun. Check it in daylight and remove droppings quickly, as the bird dropping guide describes.
Heat rises from the front, and the bay holds residue and dust. The engine bay guide explains why we talk first and rinse almost never.
Heavy, hot brake dust lodges in barrels and behind spokes. Identify the finish first with the wheel finish guide.
The doors are long, so check the space beside the car before the day, and mind the door edges against walls.
Deep creases and sculpted rear surfaces trap water and dust. A blower clears them better than towels.
The GTS and the 12Cilindri Spider carry retractable hard roofs. Keep the seals clean and dry.
| Place | Look for | Why it matters |
|---|---|---|
| Leading edge of the hood | Chips, rubbed-through spots | Chips are not polished out; they are protected |
| Wheel faces and barrels | Baked brake dust, pitting | Pitting is a sign of dust left too long |
| Door edges and sills | Scuffs and rub marks | Often from tight garages and walls |
| Exhaust tips | Heat discoloration | A cleaner for the metal, not for paint |
| Cabin leather | Dye transfer, creasing | Clean gently; do not scrub |
We point these out before any water, so nobody wonders later what was there.
Every panel in daylight with a note of anything unusual.
Their own tools and a finish-suitable cleaner.
To lift loose grit before anything touches the paint.
Light pressure, straight lines, lowest panels last.
Especially along the long shut lines and sculpted rear.
A sealant on gloss paint. Coating and correction quoted separately.
A V12 car carries large exhaust tips, and heat discoloration is a metal-finish problem, not a paint one. A metal-appropriate cleaner and a soft cloth do it, and nothing abrasive goes near the bumper beside it.
Some owners choose paint protection film on the hood and the leading edges. If yours is filmed, we clean and protect it and never machine-polish it. See the film guide for the signs that film is wearing.
A long, flat hood heats quickly. Do not wash it hot, and do not let water dry on it. A blower and a soft towel finish the job before the sun does.
Tell us the model, color, finish, carbon options and where the car is kept. We would rather decline a job than do it badly.
Book Now covers San Francisco and the northern Peninsula, and it is not the route for a car like this.
More short answers live on the FAQ.
The services this guide is about:
Back to the full guide library.
We have detailed one Ferrari, a 296 GTS. For a V12 car, a quote conversation comes first.