Book Now Quote
Book Now Quote
Services
All Services Interior Detailing Full Detail Exterior Detailing Ceramic Coating Paint Correction Pet Hair Removal
Work — sort by
View all cars Luxury Cars Exotic & Performance JDM & Japanese German Cars American Cars Italian Cars Korean Cars Befores & Afters
View by car brand
Acura Alfa Romeo Audi BMW Dodge Ferrari Fiat Ford Honda Hyundai Infiniti Jeep Kia Land Rover Lexus Maserati Mazda Mercedes-Benz Porsche Subaru Tesla Toyota Volkswagen Volvo
Learn
Guides Our Process FAQ
Company
Service Areas Reviews Contact
Call or Text
Vehicles

Is Your Paint Protection Film Failing? Signs and What a Detailer Can Do

Short answer

Paint protection film (PPF) is a clear urethane film that protects paint from stone chips and light scratches. It does not last forever, and its signs of wear are yellowing, lifting edges, peeling, cracking, staining and bubbles. A detailer can clean it, decontaminate it and protect it. A detailer cannot repair it, and does not machine-polish it.

This guide explains the signs, what causes them and what to do.

Film wears out. How to tell, and what a detailer can honestly do.

Signs

What failing film looks like

Yellowing

Clear film turns yellow, especially on white and light cars, as it ages in sun. It cannot be cleaned away.

Lifting edges

Edges curl or lift and collect dirt. A lifted edge can catch and peel.

Peeling and cracking

Film that is cracking or peeling at the surface is at the end of its life.

Staining

Dark or colored stains under the film, often from bugs or tar left on, can be permanent.

Bubbles and haze

Bubbles that appear later, or a hazy look in the film, are signs of adhesion or surface failure.

Loss of gloss

A film that is worn can look dull, even when clean.

What a detailer can do

And what to leave to an installer

Problem A detailer can An installer must
Dirt on the film and its edges Clean and decontaminate Not needed
Light staining on the surface Try a gentle cleaner Replace if it is under the film
Yellowing Nothing Replace the film
Lifting or peeling edges Clean around them Re-seat or replace the film
Cracks or deep wear Nothing Replace the film
What we do and do not do

Our position on film

We clean and protect film, and we never machine-polish it. Film installation is not on our list of services, and the installer is the right person to judge whether a film can be saved. If we see signs of failure we tell you, and we would rather say so than protect a film that needs replacing.

What to do

If you think your film is failing

  1. 01

    Photograph it in daylight

    Close and from a distance.

  2. 02

    Check the maker's guidance

    Many films come with a rated lifespan and care advice.

  3. 03

    Ask the installer

    They can inspect it, and a warranty may apply.

  4. 04

    Clean it safely until then

    A gentle wash. No abrasives, no machine polishing.

Myths

Four things people believe

Film never needs washing

It needs washing like paint, and left dirty it stains.

Film can be polished like paint

It is a different material, and a machine can burn through it.

Yellowing means the film was poor

All film yellows in time. Some earlier films yellowed faster.

A lifted edge can be glued back

Sometimes by an installer. Not by a detailer.

Local note

Sun and age in San Francisco

San Francisco's cooler summers mean less heat than inland, but UV is still strong, and a car that sleeps outside collects sun, fog and salt on the film every day. Film on a car that is garaged and washed regularly lasts longer than film on one parked outside and washed rarely.

Call a specialist

When a detail is not the answer

  • Yellowed or hazy film.
  • Film that is cracking, peeling or lifting.
  • A stain under the film.
  • A film warranty question.

Request a quote

Tell us the film, its age and what you see. We say plainly what we can do.

Book Now covers San Francisco and the northern Peninsula, and it is not the route for a rare or valuable car.

Questions

Questions we get asked

How long does PPF last?
It depends on the film, the climate and the care. Many are rated by their makers for several years. Check yours.
Can yellowed film be cleaned?
No. Yellowing is in the film. It needs replacing.
Can you polish film?
No. We never machine-polish film.
Can you remove old film?
No. Film removal is an installer's job.
Does a ceramic coating help film?
A coating on film makes it easier to wash and adds a hydrophobic layer. It is a quote item. See the guide on coating wrapped and filmed cars.
Is staining under the film permanent?
Usually. Bugs and tar left on can leave a mark that cannot be reached.
Does fog damage film?
Not directly. Dirt and salt left on it can stain.
Should I wash a filmed car more often?
Every two to four weeks is sensible. Early removal of bugs and tar prevents staining.
Can failing film damage the paint?
A lifted edge can collect dirt and, if pulled, take adhesive with it. An installer should remove failing film carefully.
Is some yellowing normal?
All film ages. Some yellowing in sun is expected, and heavy yellowing is a sign it is near the end of its life.
How do I know if the film is thin or worn?
A dull, rough or hazy surface, rounded edges and stretch marks are signs. An installer can judge.
What does it cost to replace film?
That is a question for a film installer, and it depends on the car and the area covered. We do not install film.
Can I keep driving a car with failing film?
Yes, but a lifted edge is best dealt with early, before it catches and tears. Ask the installer how urgent it is.
Can failing film be washed normally?
Yes, gently, and with a jet kept away from lifted edges. We would tell you if an edge is at risk.

More short answers live on the FAQ.

Know when film is done.

A detailer cleans and protects it. An installer judges and replaces it.

Open every day, 8 AM to 7 PM. (415) 360-1964 or sfcitywash@gmail.com. Questions first? Contact us.