Talk first
What is under the cover, what the manufacturer says, and what you want from it.
A supercar's engine bay is not a pickup's. It is tight, hot, full of heat shields, carbon and delicate parts, and a standard degrease-and-rinse is usually the wrong method. On a car like this we would talk first, dust and wipe once cool, and leave some parts alone.
Our standard engine bay detail on an ordinary car covers electrics, degreases, rinses at low pressure and dries, and it is a flat $75. A supercar is a different conversation, and this guide explains why.
Tight, hot and delicate: a supercar bay is cleaned by dusting and wiping, not by rinsing.
On an ordinary car the engine sits under a hood with room to work. On a mid-engine supercar it sits behind the cabin, under covers and heat shields, with little room around it. Parts are packed closely, many are expensive, and some are made of materials, such as carbon or lightweight alloys, that do not like strong chemicals.
A mid-engine bay stays hot long after a drive. We would only clean a cold engine, and on a car like this that can mean waiting some hours.
Modern supercars carry a lot of sensors and modules. Water in the wrong place can be an expensive mistake, which is why we would not rinse.
What is under the cover, what the manufacturer says, and what you want from it.
A long soft brush lifts dust from covers, fins and heat shields.
A blower moves loose dust out, with no wet contact.
Microfiber, barely damp, wiped gently over accessible surfaces.
A plastic-safe dressing on plastic covers, and nothing on parts that should stay as they are.
Anything we are not sure of stays as it is. We tell you what we left.
| Step | Ordinary car | Supercar |
|---|---|---|
| Engine temperature | Cold | Cold, and we wait longer |
| Cover electrics | Yes | Yes, and we avoid wet methods where we can |
| Degrease | Engine-safe degreaser | Usually not |
| Rinse | Low-pressure rinse | No rinse |
| Dry and dress | Blow-dry, light dressing | Blower, wipe, light dressing where suitable |
The standard process is described on the engine bay detailing page. On a rare or valuable car we would agree the approach with you first.
If you want to keep the bay tidy between visits, the safe tools are a soft brush, a blower and a barely damp microfiber cloth, used on a cold engine. Do not open covers you are not sure about, do not use sprays and do not use anything wet near connectors.
A photo of the bay before you start means you can put things back as they were.
A clean bay makes a new leak or a chafed hose easy to see. That is the real value of cleaning one.
Tell us the car and whether you want the bay cleaned. We would rather say plainly what is safe.
Book Now covers San Francisco and the northern Peninsula, and it is not the route for a rare or valuable car.
More short answers live on the FAQ.
The services this guide is about:
Back to the full guide library.
Talk first, dust and wipe once cool, leave what we are unsure of. That is the cautious way.