Book Now Quote
Book Now Quote
Services
All Services Interior Detailing Full Detail Exterior Detailing Ceramic Coating Paint Correction Pet Hair Removal
Work — sort by
View all cars Luxury Cars Exotic & Performance JDM & Japanese German Cars American Cars Italian Cars Korean Cars Befores & Afters
View by car brand
Acura Alfa Romeo Audi BMW Dodge Ferrari Fiat Ford Honda Hyundai Infiniti Jeep Kia Land Rover Lexus Maserati Mazda Mercedes-Benz Porsche Subaru Tesla Toyota Volkswagen Volvo
Learn
Guides Our Process FAQ
Company
Service Areas Reviews Contact
Call or Text
Vehicles

How to Care for a High-Performance Car

Short answer

A performance car does not have a different kind of paint. It has a different kind of wear: heavy brake dust, hot wheels, wide tires, low bodywork that collects tar and road debris, and materials that are less common on a family car.

The care is mostly restraint. Let it cool before washing, clean the wheels with something safe for their finish, keep tire dressing off the tread, correct paint only as much as it needs, and tell your detailer about any film, wrap or unusual surface before anyone reaches for a polisher.

Most of what makes a performance car harder to look after is not mystique. It is heat, speed and a handful of materials that do not tolerate the standard answer.

What is different

What high performance does to a car

Brake dust

Performance brake pads are generally built for bite and heat rather than clean wheels, and they tend to shed more dust. That dust carries iron, which bonds to wheels and can lodge in the paint behind them.

The wheel and brake dust guide covers the routine.

Heat

Hot brakes, hot wheels, a hot hood. Soap and cleaners dry on a hot surface and leave spots or stains.

The rule is simple: wait until the car has cooled.

Wide tires

Performance tires are wide and can pick up grit and tar. The tread exists for grip, so nothing slippery should go on it.

Dressing belongs on the sidewall.

Low front ends

Low bumpers, splitters and lips sit in the road spray and collect tar, bug residue and chips. They also meet curbs and the steep driveway lips that San Francisco garages are full of.

Unusual materials

Exposed carbon fiber, suede-like fabric, forged or specially finished wheels and bare aluminum trim all need gentler handling than the standard answer.

Film and wraps

Plenty of performance cars wear paint protection film or a wrap. That is a surface we clean and protect, and do not machine-polish.

After a hard drive

The order that protects the car after a spirited drive or a track day

The same order works after a long mountain road or a hot run on the freeway.

  1. 01

    Let it cool

    Park it, in shade if you can, and leave it. Hot wheels and hot paint make cleaners flash dry and spot. Whether cold water can warp hot brake rotors is argued about and we do not rely on it either way; the chemistry is reason enough to wait.

  2. 02

    Wheels first

    Rinse, then clean the wheels with a cleaner that suits their finish, using tools that never go near the paint. Brake dust is one of the most abrasive things on the car.

  3. 03

    Treat the lower body

    Rubber marks, tar and bug residue collect across the front end, the sills and behind the wheels. Dissolve them with a product made for the purpose rather than scrubbing. Bug, tar and sap removal is $50 flat at any size.

  4. 04

    Wash the paint as you would any other

    Light pressure, a clean mitt, dried straight away. The routine in our dark paint guide applies to any car you want to keep swirl-free.

  5. 05

    Look at the front end in daylight

    Walk round the nose, the mirrors and the leading edges of the hood. Chips are cheaper to deal with early, and a coating does not stop them. The scratches and rock chips guide is direct about that.

Materials

Surfaces that need a different answer

  • Wheels with special finishes. Polished, anodized, painted, forged and matte wheels do not all tolerate the same chemistry, and acid-based wheel cleaners are a common way to stain one. If you are not sure what the finish is, use the mildest cleaner that works and tell your detailer what the wheels are.
  • Tire dressing on the sidewall only. Keep slippery dressing off the tread, where grip is the whole point of the tire.
  • Exposed carbon fiber. It is a resin finish under a clear layer, and that clear layer can haze or fade under UV if it is left bare. Wash it like paint and protect it like paint.
  • Suede-like interior fabric. Do not treat it like leather, and never put leather conditioner on it. It mats and shines with skin oil, so it wants a gentle fabric-safe cleaner, a soft brush and very little moisture.
  • The engine bay. Performance engine bays are tightly packed with wiring, intakes and covers. We use a low-pressure rinse only, never a direct pressure wash, and we would rather you did not point one at it either. It is a $75 add-on, and the engine bay guide explains the method.
Paint

Paint: correct what needs it, and no more

Every correction removes a thin layer of clear coat, and clear coat is finite. On a car that may be polished several times in its life, the right amount of correction is the least that gets the result. The one-step versus two-step guide explains how that choice is made.

We test a small section first to confirm the process before touching the rest of the car, and paint correction is quoted rather than priced online because the right amount depends on the paint in front of us. It is sold together with at least a 12-month sealant, since correcting paint and leaving it bare is not something we recommend.

On a car wearing paint protection film or a wrap, we clean, decontaminate where appropriate and protect it. We do not machine-polish film or a wrap, so there is no correction quote for one. If the marks are in the film, polishing is not something we do.

A coating makes washing easier and resists chemical attack. It does not stop chips, and no coating manufacturer says it does.

Rare or valuable

What we ask about a rare or high-value car

Porsches, Audis, BMWs and Range Rovers are regulars on our schedule, and soft paint, delicate leather and sensitive trim all get handled accordingly. We have no special process for the badge. We have a process for the surface in front of us.

If the car is rare or particularly valuable, request a quote and we will walk through the exact scope before anything is booked. It helps to tell us about any film or wrap, any aftermarket parts, what finish the wheels have, and anything fragile or loose on the car, and photos in daylight are better than a description.

Tell us what is not standard

The things that go wrong on a performance car are almost always the things nobody mentioned: a wheel finish, a film, a loose splitter, a carbon panel. A short text before the appointment is worth more than any product choice on the day.

Book Now covers San Francisco and the northern Peninsula. Anywhere else, request a quote.

Questions

Questions we get asked

Do performance cars need a special wash product?
Not for the paint, which is paint. What they need is care around the wheels, the tires and the unusual materials: carbon fiber, suede-like fabric and specially finished wheels.
Is it safe to pressure-wash the engine bay of a sports car?
We do not. A direct pressure wash can force water into connectors and electrics. We use a low-pressure rinse and engine-safe degreasers, and we would rather you did not use a pressure washer on it yourself.
Can you polish paint protection film?
No. We clean, decontaminate where appropriate and protect film and wraps. We do not machine-polish them, and we would rather say so than risk the film.
Will a ceramic coating protect against track debris?
It resists chemical attack and makes washing easier. It is not a barrier against chips or impacts, and no coating manufacturer claims otherwise.
How soon after driving can a performance car be washed?
Once the wheels and paint are cool to the touch. Park it, ideally in shade, and give it time. Washing hot panels and hot wheels is how spots and stains get baked in.

More short answers live on the FAQ.

It is the same paint with a harder life.

Wait for it to cool, respect the wheels and the unusual surfaces, correct no more than the paint needs, and tell us what is not standard.

Open every day, 8 AM to 7 PM. (415) 360-1964 or sfcitywash@gmail.com. Questions first? Contact us.