Book Now Quote
Book Now Quote
Services
All Services Interior Detailing Full Detail Exterior Detailing Ceramic Coating Paint Correction Pet Hair Removal
Work — sort by
View all cars Luxury Cars Exotic & Performance JDM & Japanese German Cars American Cars Italian Cars Korean Cars Befores & Afters
View by car brand
Acura Alfa Romeo Audi BMW Dodge Ferrari Fiat Ford Honda Hyundai Infiniti Jeep Kia Land Rover Lexus Maserati Mazda Mercedes-Benz Porsche Subaru Tesla Toyota Volkswagen Volvo
Learn
Guides Our Process FAQ
Company
Service Areas Reviews Contact
Call or Text
Vehicles

Detailing a Wrapped or PPF-Covered Supercar

Short answer

A car wearing paint protection film or a vinyl wrap can be cleaned and protected, and it should be. We wash, decontaminate where appropriate and protect it. What we do not do is machine-polish film or a wrap, and we do not install either.

Most of the care is restraint: a hand wash with a clean mitt, no automatic brush washes, a pressure washer kept back from edges and seams, no polishes or harsh solvents, and bird droppings off the same day. If a corner is lifting or the film is marked, that is a question for the installer.

Film and wraps protect the paint underneath, and they make their own demands. The mistakes are almost all about pressure, polish and solvent.

Know what is on it

Film, wrap, or part of each

Tell your detailer which you have, and where, before anyone picks up a polisher.

Paint protection film

A clear film over the paint, usually on the front end or the whole car, to take chips and scuffs. It can be gloss or matte. Some films recover from light marks with warmth, and that is a question for the installer, not a detailer.

Vinyl wrap

A color or finish change, gloss, satin or matte, laid over the paint. Wraps are thinner and more delicate at edges and recesses, and a matte or satin one will shine up if you polish it.

Partial coverage

Many cars wear film on the nose, mirrors and sills and bare paint elsewhere. The edges are where lifting starts, and the paint beside them still needs the normal care.

Washing

How to wash film and wraps safely

  1. 01

    Follow the installer's waiting period

    After fitting, installers usually give a period before the first wash. Follow theirs, not a general number.

  2. 02

    Rinse, then wash by hand

    Cool surface, plenty of water to lift grit, then a clean mitt with light pressure. No stiff brushes.

  3. 03

    Keep the pressure washer back

    A close jet at an edge, seam or corner is how film begins to lift. Rinse from a distance, and never aim at an edge.

  4. 04

    Rinse thoroughly and dry

    Dry straight away with a clean microfibre towel or a blower. Droppings, hard water and soap left to dry mark film and wraps.

  5. 05

    Take droppings and sap off the same day

    Soften them with water and lift them off gently. Do not scrub or pick at them, and do not use a solvent unless the installer says it is safe for that product.

Keep off

What stays off film and wraps

  • Polish, compound and cutting paste. They are made for paint. They scour film and wraps and cannot be undone.
  • Machine polishers. A rotary or orbital polisher on film or a wrap is the quickest way to burn through it. It is where we draw the line, and anyone who says otherwise is risking your film.
  • Strong solvents and degreasers. Some stain or soften film and vinyl. Ask the installer what is safe, and use the mildest product that works.
  • Automatic brush washes. They carry grit and catch edges. See the automatic wash guide.
  • Wax or polish on a matte or satin surface. It leaves shiny patches that cannot be polished back. The matte and satin guide explains why.
  • Picking at a lifting edge. It makes it worse. Leave it and call the installer.
The line

Where we draw the line

We wash, decontaminate where appropriate and protect film and wraps. We do not machine-polish them, we do not install them, and we do not repair a lifting edge, a bubble or a damaged panel. If the marks are in the film, polishing is not something we do, and there is no correction quote for a film or a wrap.

Correction on the paint beneath film has to happen before the film goes on. If you are weighing that, tell us in a quote request. Our correction is sold with at least a 12-month sealant, so we would talk through whether that suits the plan, and we would not guess.

Protection over film is possible: we can apply a coating over a vinyl wrap or film, and it makes it easier to keep clean and slows how fast it dulls. On a matte or satin film or wrap, say so up front. A product that suits gloss can change a matte surface, and we would rather tell you honestly what we would use than guess. The what can be coated guide has the rest.

Our records

What our records show, and what they do not

Our job records for exotic and high-performance cars do not tag any car as wrapped or film-covered. There is a Ferrari 296 GTS full detail, a Porsche 911 GT3 exterior detail, two exterior details on the same 718 Spyder RS, a 718 Cayman S full detail and a BMW M3 Competition correction and coating, and the records do not say whether any of them wore film or a wrap. We make no claim to have cleaned film on a named car.

We have not yet detailed a Lamborghini or a McLaren. What is written above is our policy for film and wraps, not a record of past jobs. If your car is rare or particularly valuable, request a quote and we will agree the exact scope before anything is booked. The exotic car page shows the jobs we do have.

Tell us what is on the car

Film or wrap, gloss, satin or matte, full car or partial, who installed it and when, and any lifting edges or marks. Photos of the edges and the front end in daylight are the most useful.

We come to the car with our own water and power. Book Now covers San Francisco and the northern Peninsula. Anywhere else, or for a rare car, request a quote.

Questions

Questions we get asked

Can you polish paint protection film?
No. We clean, decontaminate where appropriate and protect film and wraps, and we do not machine-polish them. There is no correction quote for film or a wrap.
Can I use a pressure washer on a wrapped car?
Keep it back. A close jet at an edge, seam or corner is how film and wraps start to lift. Rinse from a distance, never at an edge, and follow your installer's advice.
Can you ceramic coat over a wrap or PPF?
Yes for cleaning and protection. We wash, decontaminate where appropriate and coat over a vinyl wrap or film, which makes it easier to keep clean. Tell us if it is matte or satin.
My film has a scratch or a lifting corner. Can you fix it?
No. We do not repair or install film. A lifting edge or a mark in the film is a question for the installer, and leave a lifting edge alone.
Do you install wraps or paint protection film?
No. We do not install either. We care for them once they are on.

More short answers live on the FAQ.

Wash it, protect it, never polish it.

Film and wraps are worth looking after. Tell us what is on the car and where, and the rest is a gentle wash.

Open every day, 8 AM to 7 PM. (415) 360-1964 or sfcitywash@gmail.com. Questions first? Contact us.