Wheel faces
Brake dust and tar. Identify the finish first with the wheel finish guide, then use a cleaner that suits it.
Rubber, tar and road film collect where the tire throws them: the wheel faces, the barrels, the tire sidewalls and, most of all, the wheel wells. Each one lifts a different way. The rule for all of them is the same: soften first, lift gently, rinse well and never work on a hot wheel.
After a long track day or a summer of road work, a car deserves a proper clean-up. This guide explains what is on the car, how to remove it and what to treat with care, and why a full refresh beats a quick rinse.
Soften, lift, rinse. What the black stuff in your wheel wells is and how to remove it safely.
Most of what blackens a wheel area is one of four things, and telling them apart tells you what to use. Tar is sticky and glossy and comes from fresh road surface on hot days. Rubber is matte, smeared or in small beads, shed by hot tires. Brake dust is a dark, gritty film that turns purple with an iron remover. Old tire dressing is brown, greasy and slings onto the paint and the wheel well.
The tire throws everything outward and upward as it spins, and the wheel well catches it. Tar, rubber, dust, salt and grit all land on the liner and the inner arch, and layer up over months. Because you rarely see it, it often goes untouched until a car is being sold or has just come off a track.
Steep hills mean a lot of heavy braking, so wheel faces load up with dust quickly. Summer road resurfacing puts tar on the lower body, and the coastal film holds dirt in place until it dries on.
| Mark | How it looks | What lifts it | What to avoid |
|---|---|---|---|
| Road tar | Black, sticky, glossy specks, mostly low on the car | Tar remover on a cloth, left to work | Scrubbing it dry; strong solvents on plastic |
| Rubber beads and smears | Matte black balls or streaks, near the rear and in the arches | Tar remover and a soft brush | Scraping with a blade or a fingernail |
| Brake dust | Dark brown or black film; purple under an iron remover | A wheel-safe cleaner or iron treatment | Strong acid on an unidentified finish |
| Old tire dressing | Brown, greasy residue and slung spots | Tire cleaner and a stiff brush | Dressing over dirty rubber |
| Road salt and film | White haze and gray grime | A gentle cleaner and a thorough rinse | Letting it dry on the surface |
Brake dust and tar. Identify the finish first with the wheel finish guide, then use a cleaner that suits it.
The inner barrel behind the spokes holds the most baked-on dust. A soft barrel brush and a finish-suitable cleaner reach it.
Brown rubber and old dressing. A tire cleaner and a stiff brush until the foam runs white, then a thin coat of dressing last. See the tire guide.
Mud, tar, rubber and salt. Loosen with an all-purpose cleaner and a long brush, then rinse at low pressure.
Tar spots and rubber flecks. A tar remover lifts them. See the tar and bug guide.
Clean what is reachable with a gentle cleaner. Do not spray degreaser onto discs, and leave wear checks to the dealer.
Hands cool to the touch. A hot wheel dries a cleaner on contact and spots the finish.
A gentle rinse of the wheels, tires and wheel wells takes off what will scratch.
An all-purpose cleaner on the liner, a long soft brush, then a low-pressure rinse. Brushes and low pressure, not a jet, because wheel wells hold sensors and wiring.
A tar remover on a cloth or soft brush, left to dwell, then wiped gently. It comes off the wheel face and the lower body the same way.
A cleaner that suits the finish, a soft brush, an iron treatment where dust has bonded. See the iron decontamination page.
A tire cleaner and a stiff brush until the foam stops turning brown.
A thorough rinse, a blower, a thin coat of tire dressing last, and a wheel-safe sealant on the wheel faces.
A long day on track is the hardest thing you do to a car's wheel area: hot brakes shedding dust, tires laying rubber and picking up debris, and everything thrown into the wheel wells. A rinse at home leaves most of it behind. A full refresh deals with all of it in the right order, from the wheels and the wheel wells through the tar and the paint to the cabin.
On our side it is a full detail with the add-ons that suit the car: iron decontamination for bonded brake dust, bug, tar and sap removal for the lower body, and a clay treatment if the paint feels rough. It is a way of describing the job, not a separate package. The track day guide lays out the order.
Our published prices for a sedan or coupe are $279 for a full detail, $75 for iron decontamination, $50 for bug, tar and sap removal and $50 for a clay bar treatment. Midsize and large vehicles cost more, and the services page lists them all.
Tell us the car, what you drive on and when it last had a proper clean, and send a photo of the wheel wells if you can.
Book Now covers San Francisco and the northern Peninsula for ordinary cars. A rare or valuable car goes through a quote request first.
More short answers live on the FAQ.
The services this guide is about:
Back to the full guide library.
Soften, lift, rinse and dress last. After a long track day, treat the car to a full refresh.