Less of it
The amount is far lower than from steel discs. Wheels stay cleaner for longer.
Carbon-ceramic brakes shed far less dust than steel brakes, but it is not zero, and what is there still sticks to wheels. Looking after them is mostly a matter of what you keep off them and how you clean around them: identify the wheel finish, use a gentle cleaner and soft tools, keep harsh cleaners and abrasives off the discs, and never clean a hot wheel.
This guide explains how to tell which brakes you have, how to care for them day to day, and what to do after a long track day, when it is worth treating the whole car to a full refresh.
Less dust, a different dust, and the same care for the wheel finish.
Carbon-ceramic brakes are an option on many high-performance cars, and they are standard on a few. Check the window sticker, the owner's manual or the option list. Visually, the discs often look dark, matte and uniform, rather than the shiny gray of cast iron, and many cars with them carry brightly painted calipers.
The dust and the cleaner you choose depend on the brake. Steel dust is iron-rich and is dissolved by an iron remover. Carbon-ceramic dust is lighter and less iron-rich, so the same product does less. The wheel finish still decides what is safe.
The amount is far lower than from steel discs. Wheels stay cleaner for longer.
It builds as a thin, dark layer on the wheel face and in the barrel, and is easier to wipe than baked-on iron dust.
Left for months, any brake dust can bake on and stain a wheel, especially a bare, polished or coated finish.
Pads contain metal particles, so a wheel can still show some iron-based staining. An iron treatment can still help.
The discs themselves are not cleaned with harsh products. Keep strong acids and degreasers off them.
Never clean a hot wheel. A cleaner dries and spots instantly, and water on hot brakes is something to avoid.
Dust that never bonds is easy to remove. A gentle wash of the wheel faces and barrels at every wash keeps it that way.
Acids, degreasers and wire brushes are not for the discs. Clean the wheel and leave the discs alone.
After hard driving the brakes are very hot. Let the car cool before any water or cleaner goes near them.
Soft brushes and microfiber on the wheel faces. Nothing abrasive on a finish you have not identified.
Manufacturers publish guidance on cleaning and on what to avoid. Where it differs from ours, theirs wins.
How worn the discs and pads are is a question for the dealer or a specialist, not for a detailer. We clean and we point out anything unusual.
Hands cool to the touch before any water.
Painted, clear-coated, machined, polished, bare, coated or carbon. See the wheel finish guide.
A gentle rinse takes off the loose film before any contact.
Applied with a soft brush and rinsed thoroughly. Keep it off the discs.
Where the wheel shows a bonded film, an iron treatment dissolves what is left. See the iron decontamination page.
A blower and a soft towel, and a wheel-safe protection afterwards.
| Do | Do not |
|---|---|
| Clean wheels often, so dust never bonds | Wait months and then use a strong acid |
| Use soft brushes and a finish-suitable cleaner | Use a stiff brush on a bare or polished finish |
| Keep cleaner off the discs and calipers | Spray degreaser onto the discs |
| Rinse thoroughly | Let a cleaner dry on the wheel |
| Steel discs | Carbon-ceramic discs | |
|---|---|---|
| Amount of dust | A lot | Much less |
| Look of the dust | Heavy, dark brown or black, gritty | A fine, dark film |
| Iron content | High; an iron remover dissolves it | Lower; an iron remover does less |
| How it bonds | Bakes on and can pit a finish | Bonds more slowly, but still can |
| Cleaning rhythm | Every wash | Every wash or two |
A ceramic coating on a wheel makes the surface smoother and more resistant to bonding, so dust rinses off more easily. It is not a shield, and a coated wheel still needs cleaning, but it saves a great deal of effort. The guide on what can be ceramic coated covers wheels and the other surfaces a coating suits.
A bare or polished wheel is the most sensitive to stains and to cleaner, so it benefits from the gentlest approach and the most regular washing.
A long day on track sends carbon-ceramic brakes through repeated heavy heat cycles, and leaves the wheels, the tires and the wheel wells coated in dust, rubber and tar. A quick rinse leaves most of it behind. A full refresh cleans the wheels and brakes area first, lifts the rubber and tar from the tires and wheel wells, decontaminates the paint and finishes inside the cabin.
See detailing after a track day for the order we work in, and removing rubber and tar from wheels, tires and wheel wells for the wheel-area clean-up in detail.
Tell us the wheel finish, the brakes and the car, and we say what we are comfortable doing.
Book Now covers San Francisco and the northern Peninsula for ordinary cars. A rare or valuable car goes through a quote request first.
More short answers live on the FAQ.
The services this guide is about:
Back to the full guide library.
Less dust, the same care. Identify the finish, use a gentle cleaner and keep cleaner off the discs.