Forged alloy
Machined from a forged blank, usually lighter than a cast wheel. The finish on top varies: painted, clear-coated, polished, anodized, satin or matte.
The finish, more than the forging, decides what you can use on it.
Forged and carbon-fiber wheels are cleaned the way any good wheel is, only more gently and with fewer chemicals: cool wheels, a rinse first, a wheel cleaner chosen for the finish, soft brushes, a thorough rinse, dried straight away. What changes is the price of a mistake. A stripped clear coat or a scoured finish is a refinishing job, not something you polish out.
If you do not know what the finish is, use the mildest cleaner that works, try a small area before the whole wheel, and keep acids and stiff brushes away until you have asked the wheel's maker. Brake dust is the real enemy, and the answer to a lot of it is cleaning more often, not cleaning harder.
No product names here on purpose. Which cleaner is right depends on the finish, and the safest source for that is the people who made the wheel.
Machined from a forged blank, usually lighter than a cast wheel. The finish on top varies: painted, clear-coated, polished, anodized, satin or matte.
The finish, more than the forging, decides what you can use on it.
A composite wheel, with a resin and clear layer protecting the weave. Construction varies by maker, and some carbon wheels combine a carbon rim with metal hardware or a metal center.
That clear layer is the surface you are cleaning. UV, chips and harsh chemicals all go for it.
Do not guess from the shine. A matte or satin look can be a factory finish, and bright metal can sit under a clear coat that would not tolerate a metal polish.
The wheel's maker or the paperwork that came with the car will tell you.
The wheel and brake dust guide covers the routine for ordinary wheels. This is the same routine with the margin for error taken out.
Hot wheels dry cleaners onto the surface and leave spots or stains that look like damage. Park the car and wait until the wheels are cool to the touch.
A good rinse takes off loose dust and grit. Brake dust is abrasive, and dragging it across a wheel with a brush is how a finish gets scratched.
A wheel-safe, mild cleaner, used as its label says, and never left to dry on the surface. Keep wheel tools separate from the tools that touch paint.
A soft-bristle brush for the barrel and the gaps between spokes, a soft detailing brush around the lug nuts or center-lock nut, and microfibre for the face. Nothing with metal bristles, nothing abrasive.
Cleaner left in the lug holes, around the center and behind the spokes marks the finish as it dries. Rinse, then dry with a clean microfibre towel or a blower.
A clean wheel shows what is really there: chips in the clear, curb marks, a lifting edge. Better to find it now than to scrub across it next time.
Brake dust carries iron particles that bond to a wheel and can lodge in the paint around it. Performance pads tend to shed more of it. A wheel that is cleaned every week or two never builds the bonded layer that tempts people into stronger chemicals.
Calipers are often painted. Use a soft brush, no solvent, and let them cool before anything wet goes near them. Do not scrub a caliper to make a point; its paint is not made for it.
The inner barrel behind the spokes is where dust lives and where balance weights are stuck, so be gentle with it and rinse well. If a wheel has a curb mark, a chipped clear coat or a hairline crack, stop cleaning across it.
A chip in the clear, a bright curb scrape or a lifting patch is not something a wash fixes, and it is not something we repair. We do not refinish, repair or straighten damaged wheels, and we do not do tire, brake or other mechanical work.
On a carbon-fiber wheel, a crack, a soft spot or clear coat lifting from the weave is a question for the wheel's maker or a specialist, not a detailer. Stop cleaning around it and ask them.
What we can do is clean wheels and protect them. A ceramic coating can go on wheels so that brake dust rinses off more easily, and it is quoted alongside the paint if you ask for it in your quote request. On an unusual finish we would rather see it first and tell you plainly if we have a concern.
Wheel and caliper close-ups are a regular part of our sports-car photo sets. Both exterior details on the Porsche 718 Spyder RS on record (the same car, on two visits, in the Richmond District and the Outer Richmond) include front and rear wheel and caliper shots, among them a rear center-lock wheel and a rear tire noted as 295/30. The Porsche 911 GT3 set includes a front wheel and brake. The BMW M4 exterior detail in Portola has before-and-after pairs of its wheels, one of them a rear hub with white residue on it.
The records do not say whether any of those wheels were forged or carbon-fiber, or what finish they had, so we make no claim that we have cleaned either type on a named car. We have not yet detailed a Lamborghini or a McLaren. For a rare or particularly valuable car, request a quote and we will agree the scope, wheels included, before anything is booked.
Maker, finish if you know it, and any chips or curb marks you have already seen. A photo of each wheel in daylight is better than a description, and it is the thing we cannot guess.
Book Now covers San Francisco and the northern Peninsula. For anywhere else, or a rare car, request a quote.
More short answers live on the FAQ.
The services this guide is about:
Back to the full guide library.
That is nearly all of it. The rest is knowing what the finish is before anyone reaches for something stronger.