A gentle wash
Pre-foam, a long rinse and a two-bucket wash with a soft mitt. Grit is the main enemy.
Tri-coat and pearl paints use a color layer, a translucent mid-coat and a clear coat, which gives depth and a color that shifts with the light. They are beautiful and harder to repair: a mark that goes through the clear can reach the mid-coat, and a spot repair is very hard to match.
This guide explains what these paints are, why they need more care, and how we would wash, protect and, only when it is wise, polish them.
A richer, deeper paint with less room for error: how to look after it.
A conventional paint is a color coat and a clear coat over a primer. A tri-coat adds a third layer between them: a translucent mid-coat, often containing pearl or mica particles, that sits over a base color. Light passes through the clear and the mid-coat and reflects off the base, which is why the color seems to glow and shift as you walk around the car.
Special-order colors on exotics and luxury cars, many whites and some deep reds, and metallic or pearl colors on a wide range of cars.
The extra layer is thin, and it is part of the color. Polishing too far or an unlucky scratch can disturb it, and the result is hard to repair invisibly.
Pre-foam, a long rinse and a two-bucket wash with a soft mitt. Grit is the main enemy.
A sealant or coating on top of the clear coat protects everything beneath it.
Polishing removes clear coat. On these paints we want to know the paint's history and thickness first. See the paint thickness guide.
Matching a tri-coat by eye is difficult, and a repaired panel may look different at an angle. It is a body shop job.
A color that shifts means a defect may show in one light and not in another. Look in sun, shade and artificial light.
Heat and UV age every paint, and a garaged car lasts longer.
| Step | What we do | What we avoid |
|---|---|---|
| Wash | Pre-foam, long rinse, soft two-bucket wash | Dry wiping or a gritty mitt |
| Decontaminate | Iron treatment where dust has bonded; clay sparingly | Aggressive claying |
| Polish | Only after the paint has been read, and quoted | A machine on paint we do not know |
| Protect | A sealant or a coating | Waxes with abrasives |
Correction is only sold bundled with at least a 12-month sealant, and it is quoted after we have seen the paint.
A clear photo from two angles shows its depth.
Rubbing a mark makes it bigger.
If it does, it is deeper than a light scratch.
A shallow mark may polish out. A deep one is a body shop question.
A tri-coat is mixed to a paint code, but the finished color depends on how thickly each layer is sprayed and how the pearl particles settle. Two panels painted on different days can differ slightly, so a repaired panel may look different from its neighbors at some angles. Good body shops blend the repair into adjacent panels to hide the difference.
A repainted panel on a high-value car is something a careful buyer wants to know about. It is better to disclose it than to have it found.
A detail cleans, polishes and protects the paint that is there. It cannot add paint, and it cannot match one panel to another.
Send daylight photos and tell us the paint code or name if you know it.
Book Now covers San Francisco and the northern Peninsula, and it is not the route for a rare or valuable car.
More short answers live on the FAQ.
The services this guide is about:
Back to the full guide library.
Wash gently, protect the clear coat and be careful with a machine.