Whether a panel has been repainted
A reading far above its neighbors suggests added paint or filler. That matters, because new paint behaves differently.
Every time paint is polished, a very small layer of clear coat is removed for good. A thickness reading tells you how much is there, whether a panel has been repainted and whether polishing is wise. It is not a magic number, but it is better evidence than guessing.
This guide explains what the numbers mean, what they cannot tell you, and what to ask any detailer before a machine touches a valuable car.
A polish is a one-way trade. A thickness reading helps you know what is left to trade.
A car's paint is several layers: primer, a color coat and a clear coat on top. Together they are a fraction of a millimeter thick, and the clear coat is the thinnest part. Thickness is measured in microns (a micron is a thousandth of a millimeter) or in mils (a mil is about 25 microns).
A polish levels the clear coat by removing a thin layer, a few microns at a time depending on the product and the pad. It does not add anything. Once it is gone it is gone.
Factory paint on a steel or aluminum panel often reads somewhere around 100 to 140 microns, with variation by make and panel. A panel that reads much higher may have been repainted. A panel that reads much lower may have been polished a lot.
A reading far above its neighbors suggests added paint or filler. That matters, because new paint behaves differently.
A healthy reading leaves room for correction. A low one is a warning.
A gauge measures the whole paint stack, not the clear coat alone.
Steel needs one kind of gauge, aluminum another, and carbon fiber and composites need a different method altogether.
Readings differ from panel to panel and from place to place on a panel. One number is not the car.
A reading helps a decision. It does not promise a result.
| What you find | What it suggests |
|---|---|
| Consistent, healthy readings | Correction is possible, within limits |
| One panel much higher | A repaint; treat it carefully and say so |
| Low readings | Protect rather than polish |
| A panel that cannot be read | Judge by eye and ask the owner what they know |
| No reading at all | Proceed more cautiously, and agree the limits first |
We look at a car's panels before any machine goes near it, and we agree the scope with you first. Correction is quoted after we have seen the paint, is only sold with at least a 12-month sealant, and is never the right answer to a question that a wash and a sealant can solve. We do not publish a standard gauge procedure, and we do not claim a reading makes a polish safe. We claim only that it is better to know.
A good answer involves looking at every panel, and sometimes measuring.
A good answer involves caution and telling you.
A good answer includes limits.
A good answer involves protecting rather than polishing.
A good answer is yes, before and after.
Tell us whether you know the paint's history, and send daylight photos. We say plainly whether we think polishing is wise.
Book Now covers San Francisco and the northern Peninsula, and it is not the route for correction or a rare or valuable car.
More short answers live on the FAQ.
The services this guide is about:
Back to the full guide library.
A polish removes a little paint for good. A reading and a careful look tell you whether that is worth it.