Book Now Quote
Book Now Quote
Services
All Services Interior Detailing Full Detail Exterior Detailing Ceramic Coating Paint Correction Pet Hair Removal
Work — sort by
View all cars Luxury Cars Exotic & Performance JDM & Japanese German Cars American Cars Italian Cars Korean Cars Befores & Afters
View by car brand
Acura Alfa Romeo Audi BMW Dodge Ferrari Fiat Ford Honda Hyundai Infiniti Jeep Kia Land Rover Lexus Maserati Mazda Mercedes-Benz Porsche Subaru Tesla Toyota Volkswagen Volvo
Learn
Guides Our Process FAQ
Company
Service Areas Reviews Contact
Call or Text
Exterior

How to Clean a Supercar Diffuser, Splitter and Underbody

Short answer

A supercar's splitter, side skirts and rear diffuser sit closest to the road and collect tar, rubber and brake dust. They are cleaned with a gentle foam, soft brushes and a careful rinse. The underbody beyond what you can reach from the ground is a job for a workshop with a lift.

This guide covers what we would clean, how, and what we would leave alone.

The lowest parts get the dirtiest. Here is how to clean them safely.

The parts

What collects what

Front splitter

Tar, scuffs and rock chips. Usually painted plastic or carbon.

Side skirts

Tar and road spray along the sides. Low to the ground and easy to scuff.

Rear diffuser

Brake dust, soot from the exhaust and road film. Fins and channels trap dirt.

Wheel arches

Mud and road film in the liners behind the wheels.

The flat floor

Largely hidden. Dirt there is mostly harmless.

Carbon parts

Any exposed carbon is washed like paint. See the carbon guide.

The method

How we would clean them

  1. 01

    Pre-foam the lower car

    A foam dwell loosens tar and road film.

  2. 02

    Soft brushes

    Long, soft brushes reach fins and channels.

  3. 03

    A tar remover where needed

    Tar and rubber marks come off with a suitable product. See the bug, tar and sap removal page.

  4. 04

    A gentle rinse

    Low pressure, never a jet into a channel.

  5. 05

    Blow dry

    A blower clears water from fins and channels.

  6. 06

    Protect

    A sealant on painted parts.

Reach

What we can and cannot do

Area Can we clean it? Note
Splitter and side skirts Yes Soft brushes, gentle foam
Rear diffuser Yes Fins and channels with a soft brush
Wheel arches Yes, what is reachable No jets into liners
The flat floor and belly pans Only what we can see and reach Anything that needs a lift is a workshop job
Suspension and drivetrain No A workshop job
A note on safety

We stay on the ground

Anything that needs the car lifted is a job for a lift and a workshop. We clean what is reachable from the ground and we do not work under a car held up by a jack.

Why it collects what it does

Aerodynamics, briefly

A diffuser works by speeding up and then slowing the air under the car, which creates a low-pressure region that pulls dust and road spray towards it. Add rubber shed from the tires, soot from the exhaust and brake dust, and the rear of a supercar gets very dirty very quickly. A splitter does the opposite job at the front, and it takes the tar and the road film.

Rubber marbles

Small balls of rubber from hot tires stick to the rear of a car and its diffuser. They come off with a tar remover and a soft brush.

What is that?

Three common marks

Mark How it looks What removes it
Tar Black, sticky specks, mostly on the lower body Tar remover
Rubber Black, matte smears or small balls near the rear Tar remover and a soft brush
Brake dust Dark brown or black film near the wheels A suitable wheel or iron cleaner
Common mistakes

What to avoid

  • Scrubbing a splitter with a stiff brush.
  • Aiming a jet into diffuser channels.
  • Using a strong degreaser on carbon or coated parts.
  • Leaving tar on a painted lip until it stains.

Request a quote

Tell us the car and what you want cleaned, and send a photo of the diffuser or splitter.

Book Now covers San Francisco and the northern Peninsula, and it is not the route for a rare or valuable car.

Questions

Questions we get asked

Can you clean a diffuser?
Yes, what we can reach, with soft brushes and a gentle foam.
Can you clean the underbody?
Only what is reachable from the ground. Anything that needs a lift is a workshop job.
Will a coating help?
A coating on painted parts makes tar and dirt easier to remove. It does not stop scrapes.
What about tar on the splitter?
A tar remover lifts it. If it has stained a part, we say so.
How often should I clean these parts?
Every wash is ideal, because tar and dust bond with time.
Do you clean carbon splitters?
Yes, like paint, never with abrasives.
Why does the back of my car get so dirty?
Air flows under the car and pulls dust and road film towards the rear. Soot and rubber add to it.
Can tar stain a carbon diffuser?
It can sit in the weave. A gentle remover and a soft brush lift it, and a protected surface helps.
Do you work under the car?
We clean what we can reach from the ground. Anything that needs a lift is a workshop job.
Do I need to protect a splitter?
A sealant helps on painted parts. Some owners add film on the lowest edge. If you do, we clean and protect it.
Can scrapes be polished out of a carbon splitter?
Light marks in the clear layer sometimes can. A deep scrape cannot, and we say so.
How do I know if tar has stained a part?
If a dark mark remains after the remover, it has stained. We tell you what we see.
Can you clean the exhaust area behind the diffuser?
Yes, what we can reach, with a soft brush and a suitable cleaner kept off the paint.
Do you clean carbon undertrays?
What is reachable from the ground, with the same gentle method as carbon paint.
How can I keep the splitter cleaner?
Wash it every time and remove tar early. A sealant on painted parts helps.

More short answers live on the FAQ.

The lowest parts, cleaned carefully.

Soft brushes, gentle foam, low pressure and no jets into channels.

Open every day, 8 AM to 7 PM. (415) 360-1964 or sfcitywash@gmail.com. Questions first? Contact us.